How To Reinstall Windows 10 If Computer Won't Boot

How To Reinstall Windows 10 If Computer Won't Boot

Reinstall Windows 10 to fix a non-booting computer. Use the Media Creation Tool and update device drivers to resolve boot and hardware issues.


Are you having trouble getting your computer to boot up? You're not alone! Windows 10 is a powerful operating system, but it's not immune to problems.

If you've tried all the usual solutions and nothing is working, it might be time to reinstall Windows 10. Reinstalling Windows 10 can be daunting, but it doesn't have to be.

In this article, I'll walk you through reinstalling Windows 10 if your computer won't boot. I'll also provide tips and tricks to make the reinstallation process as smooth and painless as possible.

Troubleshooting Windows 10 Boot Issues

When your computer won't boot, and you're stuck with a Windows 10 installation that won't start, the first thing to do is troubleshoot. Start by checking the master boot record, as this is a common cause of boot issues. If you're using Windows Vista or earlier, you can use the command prompt to check the master boot record. If the problem is more serious, you may need to use a data recovery tool to repair the master boot record.

On the other hand, if you're getting blue screens or error messages, you should check the HDD (hard drive). If using an external hard drive, ensure it's connected properly. You can also try running a check disk utility in Microsoft Windows to see if there are any issues with the hard drive.

Troubleshooting Windows 10 boot issues can be a tricky process, but it's essential to take the time to diagnose the problem before attempting to reinstall Windows 10. With a little effort, you can save yourself the headache of recovering lost data due to a faulty installation.

The next step to reinstalling Windows 10 is to understand the boot process.

Understanding The Windows 10 Boot Process

Understanding the Windows 10 boot process is essential for successfully reinstalling Windows 10 if your computer won't boot. This process begins when your computer is powered and runs through a sequence of tests to ensure the hardware is working correctly. During this process, your computer reads various windows updates and other instructions from physical memory while clearing your browsing history. Once the tests are complete, you will be prompted to press enter to start the installation process.

At this point, Windows will present you with several advanced options for configuring the installation. You will need to enter your product key and select the hard drive on which you want to install Windows 10, usually a Western Digital plus ultra. Once you have chosen it, the installation process will initiate, and you can reset your computer.

The next step is configuring the BIOS/UEFI settings for Windows 10. This will be the final piece to the puzzle of reinstalling Windows 10, allowing you to enjoy a seamless and secure experience.

Configuring Bios/UEFI Settings For Windows 10

Before reinstalling Windows 10, it is essential to configure the BIOS/UEFI settings so the computer can boot from a flash drive or external hard drive. Knowing how to configure these settings properly will ensure a smooth reinstallation process.

You will need to use a USB drive to store the files necessary to reinstall Windows 10. You can either drag and drop the files directly onto the drive or use a program like Google Chrome to download them.

Once the files are on the USB drive, you can insert them into your computer and enter the BIOS/UEFI settings menu. From here, you will need to change the boot device order so that the USB drive is the first booted device. This will allow the computer to boot from the USB rather than the hard drive.

After the settings have been changed, you can restart the computer, and the Windows 10 reinstallation process should begin. Once the reinstallation has been completed, you can customize your PC, including setting up RSS feeds and adding a payment method such as a credit card.

Now that the BIOS/UEFI settings have been configured, you can delve into the world of advanced startup options for Windows 10.

Using Advanced Startup Options For Windows 10

If you cannot successfully boot up your computer, you may need to use advanced startup options for Windows 10. This feature provides you with a variety of options for troubleshooting, such as restoring from a system restore point, resetting your PC, or running a hardware diagnostic.

In addition, you can use this feature to access your data from a different region, such as the Middle East or Latin America, or to restore corrupted files. It can also help you if you need to prove a recent vaccination or if you need to access a video game that's not available in your current region.

Advanced startup options for Windows 10 can be a great way to get your computer running again if it won't boot. Taking a few minutes to explore this feature can save you a lot of frustration and help you get back to your daily tasks quickly.

With this newfound freedom, you can now focus on accessing the command prompt for Windows 10.

Accessing The Command Prompt For Windows 10

Once you've accessed the command prompt, you'll be ready to take the next step to get your computer up and running again.

The command prompt is a powerful tool that can help you troubleshoot and fix many of the common issues you might experience with Windows 10. You'll need to boot your computer into safe mode to access this tool.

To do this, press the F8 key while your computer is booting up and select the 'Safe Mode with Command Prompt' option. Once you've done that, type in the command 'cmd' and hit enter to launch the command prompt.

From here, you'll have access to a wide range of commands that can help you diagnose and fix the problem. With some troubleshooting, you can get your computer up and running again.

With the command prompt now available, it's time to prepare a USB drive for the Windows 10 installation.

Preparing A Usb Drive For Windows 10 Installation

The first step in reinstalling Windows 10 is to prepare a USB drive with the installation files. This will allow you to create a bootable drive that you can use to start the installation process.

You'll need a blank USB drive with at least 8GB of storage to prepare the USB drive. Make sure it is formatted as a FAT32 drive, as this is the only type of drive that Windows 10 will recognize.

Next, you'll need to download a copy of the Windows 10 ISO file. This file is available for free from Microsoft's website, and it contains all of the necessary installation files.

Once you've downloaded the ISO file, you can use a tool such as Rufus to create a bootable USB drive. This tool will allow you to quickly and easily create a bootable drive that you can use to reinstall Windows 10.

Once you have a bootable USB drive, you're ready to move on to the next step. With the correct installation files at your disposal, you can now identify the correct version of Windows 10 to install on your computer.

Identifying The Correct Version Of Windows 10 To Install

Choosing the correct version of Windows 10 for your computer is essential for reinstalling and setting up the operating system.

First, you will need to check the version of Windows 10 that your computer was originally running. To do this, open the Settings panel, go to the System menu, and select About. This section will show you the version that you initially installed.

Once you've identified the correct version of Windows 10, you'll need to find a way to download and install it on your computer. Fortunately, Microsoft offers a variety of options for downloading and installing Windows 10.

Moving forward, you'll be able to select the best option for downloading and installing Windows 10, ensuring a smooth and successful reinstallation of your operating system.

How To Download And Install Windows 10

Now that you've determined to reinstall Windows 10, the next step is to download and install it. With the latest version of Windows 10, the process is easier than ever and only takes a few minutes.

First, you'll need to go to the Microsoft website and download the Windows 10 installation media. You can do this on any computer with an internet connection, so you don't need to worry about having a functional computer to download Windows 10.

Once the download is complete, you'll need to burn the installation media to a DVD or USB drive. This will allow you to boot from the drive and install Windows 10 on your computer.

Lastly, you'll need to insert the installation media into the computer and follow the on-screen instructions to install Windows 10. With the installation, you'll be ready to move on to the next step: understanding Windows 10 product keys and activation.

Understanding Windows 10 Product Keys And Activation

When reinstalling Windows 10 on your computer, it is important to understand the product key and activation process. With a valid product key, your Windows 10 may work properly.

Having a valid product key and activating Windows 10 will give you the freedom to use the features and updates of the operating system without any limitations.

Knowing where to find your product key and how to activate Windows 10 will help ensure your reinstallation process is successful.

Once you're familiar with the product key and activation process for Windows 10, you'll be ready to move on to the next phase of reinstallation. Troubleshooting any issues that may arise during the installation process is the next step in getting your computer up and running.

Troubleshooting Windows 10 Installation Problems

Sometimes, the process can still be plagued by glitches even after taking all the proper steps to reinstall Windows 10. If your computer won't boot and you've exhausted all other options, it's time to troubleshoot.

First, check if your Windows 10 installation media is corrupted. To do this, you can run the installation media on another computer to check if it works. You'll need to get a new installation media if it doesn't.

Next, make sure your computer is compatible with Windows 10. If your computer is too old, the installation may fail. If this is the case, you'll need to upgrade your hardware.

Finally, check if any BIOS or firmware updates are available for your computer. Outdated BIOS or firmware can prevent Windows 10 from installing correctly.

You can ensure that your Windows 10 installation will go as smoothly as possible by troubleshooting any potential issues.

If you're still having trouble, it's time to get help from Microsoft Support.

Getting Help From Microsoft Support For Reinstalling Windows 10

If you're having trouble reinstalling Windows 10, consider getting help from Microsoft support. They have a team of highly trained experts who are available to assist you with any issues you may have.

The great thing about Microsoft support is that they can offer personalized guidance to help you get the job done right. Plus, they'll be able to provide you with the latest updates and patches to ensure your system is up-to-date and running smoothly.

To access Microsoft support, you must visit their website and fill out a short form. Once you've provided the necessary information, you can submit a request for help, and a Microsoft support representative will be in touch.

With the help of Microsoft support, you can rest assured that your Windows 10 reinstallation will succeed.

By taking this extra step, you'll enjoy the full benefits of Windows 10 without any of the headaches that come with a troublesome reinstallation. Plus, you'll be able to move on to the next step: Choosing the right data backup strategy before reinstalling Windows 10.

Choosing The Right Data Backup Strategy Before Reinstalling Windows 10

Before you take the plunge and reinstall Windows 10, it's essential to consider your data backup strategy (or backup software).

By backing up your data, you can be sure that all your essential files and documents will remain safe, no matter what happens to your computer.

You have a few different options for backing up your data. One is to use an external hard drive to securely store your files and documents.

Another option is to use a cloud-based backup service. With this option, your data will be stored in a secure online location, making it accessible from any computer or device.

Take the time to research your backup options and decide which one is right for you. Doing so will give you the peace of mind that your data is safe, even when you reinstall Windows 10.

Once you've chosen a data backup strategy, you can confidently move forward with the reinstallation process. And once the reinstallation is complete, you'll be ready to start the process of reinstalling all of your drivers.

How To Reinstall Drivers After Reinstalling Windows 10

Once you've reinstalled Windows 10, you'll need to reinstall any drivers your computer requires. This can include drivers for your audio and video hardware, network adapters, printers, and other peripherals.

To reinstall these drivers, you can either access the manufacturer's website and download the drivers directly or use Windows Update to check for and install the necessary drivers.

For the best results, it's essential to make sure you have the latest drivers installed. This will ensure that your computer is performing at its best and that you have the most up-to-date security patches.

Once you've reinstalled all the necessary drivers, you'll be ready to use your computer again. To ensure that you don't run into any more problems, it's essential to understand the common mistakes to avoid when reinstalling Windows 10.

Common Mistakes To Avoid When Reinstalling Windows 10

When reinstalling Windows 10, it's essential to avoid some common mistakes. Many people need to back up their files and settings beforehand, which can lead to lost data.

Be sure to back up all your important documents and settings before beginning the reinstallation. Having a Windows 10 installation disk on hand is also a good idea, allowing you to reinstall the operating system quickly and easily.

Another common mistake is forgetting to update the software after reinstalling Windows 10. It's essential to keep your software up to date, as this will ensure that your computer runs optimally.

Finally, carefully read through the installation instructions before beginning the reinstallation process. Following the instructions will ensure that the process goes smoothly and that your computer is correctly set up.

By avoiding these common mistakes, you'll be able to quickly and easily reinstall Windows 10 on your computer. With that said, the next important step is ensuring that your computer is secure after the reinstallation.

Keeping Your Computer Secure After Reinstalling Windows 10

After successfully reinstalling Windows 10, it's essential to keep your computer secure. Reinstalling the operating system is only the first step.

Start by ensuring that your computer runs the latest version of Windows 10. Microsoft regularly releases security updates and bug fixes, and it's essential to keep your system updated.

Next, make sure that you have antivirus software installed on your computer. Antivirus software helps protect your system from malicious software, such as viruses and other malware.

You should also ensure that your computer's firewall is enabled. This will block unwanted incoming connections, keeping your system safe from outside attackers.

Finally, be sure to create strong passwords for all of your accounts. Weak passwords make it easy for hackers to gain access to your system, so it's important to create passwords that are difficult to guess.

By taking the time to secure your computer after reinstalling Windows 10, you can rest assured knowing that your system is safe and secure. You'll be free to do whatever you want without worrying about compromising your computer's security.

Some Frequently Asked Questions

How to Fix Boot Windows 10 When Your Computer Fails to Boot Normally?

If your computer is failing to boot normally into Windows 10, there are a few steps you can try to resolve the issue.

First, try booting into Safe Mode to see if you can resolve the problem. To do this, restart your computer and repeatedly press the F8 key until the Advanced Boot Options menu appears. From here, select Safe Mode and press Enter.

If you cannot boot into Safe Mode or the problem persists, you may need to repair or reinstall Windows 10. To do this, you will need to boot from a Windows installation media, such as a USB drive or DVD.

To create installation media, you can use the Media Creation Tool provided by Microsoft. Once you have the installation media, boot from it and follow the prompts to repair or reinstall the operating system.

It is also recommended to ensure that all necessary device drivers are up to date and properly installed to avoid any potential issues during the repair or reinstallation process.


Reinstalling Windows 10 can be difficult and time-consuming, but it can also be a great way to get your computer back up and running if it won't boot. It's essential to make sure you have a backup of your data before you begin the reinstallation process and a good idea of the steps involved.

By following the steps outlined in this article, you should be able to reinstall Windows 10 on your computer successfully. With the right approach and knowledge, you should get your computer running correctly again.

Reinstalling Windows 10 is a great way to get your computer back to its original state and running smoothly. With the proper preparation and knowledge, the process should be straightforward, and you should be able to get your computer up and running again in no time.

Table of Contents
Great! Next, complete checkout for full access to MWSoft.
Welcome back! You've successfully signed in.
You've successfully subscribed to MWSoft.
Success! Your account is fully activated, you now have access to all content.
Success! Your billing info has been updated.
Your billing was not updated.